My 10 Favorite Easy Sewing Projects For Beginners | Best Sewing Review
Saturday , December 15 2018
Home / Beginner / My 10 Favorite Easy Sewing Projects For Beginners
My Favorite Easy Sewing Projects For Beginners

My 10 Favorite Easy Sewing Projects For Beginners

A new art, a new beginning, Maybe you would love to start sewing or even improve your skills. Here are some guides that will help you stay motivated as you work on your project as a beginner. Some of the sewing projects for beginners that will help you begin sewing with confidence. The projects are as amazing as your newfound skill. Remember that practice makes perfect. However, before we dive in here are some of the most essentials points you need to have in mind. To start with beginner sewing project you may feel annoyed because the last thing you want for your project to look like a beginner made them. All of my projects are elegant to learning the basics projects.  Here are my favorite easy sewing projects for beginners. But good thing is that no one will know that they were meant for a beginner.

 

Sewing Projects For Beginners

1.  Keychain Chapstick Pouch

Keychain Chapstick Pouch
Keychain Chapstick Pouch

Sewing a keychain chapstick pouch is one of the primary and easy sewing projects that anyone with sewing skill can be able to do it. Keychain loop and a Small piece of cloth are some supplies that you need to start sewing.

How do you do it?

Only one piece of fabric is needed. Cut it into about 3 ½ inches wide by 9 inches long. With the right sides together, fold it into a half and sew the long side. Turn it inside out. Press it flat making sure that the seam is on one side. Fold it under about ½ inch and hem one of the edges, pressing it flat. Again, fold it about ½ inch, press it flat and then stitch it across there. Flip to the other side and hem it. Fold it a few inches and make sure that there is an inch or two left on the top. Now, start sewing both sides that you have folded. After that, thread on its top through the key ring.

 

2. Waterproof Hotchpotch Picnic Blanket

Waterproof Hotchpotch Picnic Blanket
Waterproof Hotchpotch Picnic Blanket

Materials needed

  • Seven different textiles, each ½ yard
  • 55 by 70 or larger vinyl tablecloth
  • Three packages of fold quilt binding.
  • Two ½ yards wide ribbon
  • Embroidery spray
  • Safety pins

Start by cutting 21 pieces of 14” by 14” each from the seven different fabrics. You will need a total number of 20 squares.

Stitch together the squares into five rows of four squares using a seam allowance of ¼” for each. Using a large table or laying the vinyl tablecloth on the floor with the wrong side up. Spray the vinyl tablecloth with the embroidery spray. With the wrong sides facing up, put the picnic blanket on top of the tablecloth. Use safety pins to secure it around the ends.

Then, stitch its top to the tablecloth using a straight stitch of about 1/2. Make sure you sew it from the outside edge. Decide on the type of sides that you want. Stitch the three packages of the double fold together. Open the quilt binding. The blanket’s raw edge has to line up with the edge raw of the binding.

With the stitches closed, match the binding ends and get back to the starting point. Refold the quilt binding. Stitch the blanket into its right side. Fold it into thirds lengthwise to roll it. After turning, use ties to wrap it.

Also Read: 7 Best Sewing Machine For Kids | My Top Picks

3. Laptop Sleeve

Laptop Sleeve
Laptop Sleeve

Materials needed

  • ½ yard of felt.
  • Velcro (small piece)

Lay your laptop on your felt. Cut a part of the felt that will about 1 ½ inch wider than your computer.

So, if your laptop is about 12 ½” by 9”, cut the sleeve into about 14” by 10 ½ “. Double up the felt so that the sleeve will be cushiony.

Using the measurements above, cut two pieces of the sleeve and then cut two more pieces that have the width but are about 6-7 inches longer. Pin the four pieces together with the two smaller ones at the front and the bigger ones at the rear.

 

4. A Simple Way of Sewing a Pillowcase

A Simple Way of Sewing a Pillowcase
A Simple Way of Sewing a Pillowcase

Materials:

  • 1-yard texture for pillowcase body
  • 1/2 yard texture for pillowcase band
  • 1/2 yards 1″ full lace for trim
  • Crease Tape
  • String
  • To an extent a pad cover cut:
  • 11″ x 40″ for the pillowcase band
  • 28″ x 40″ for the pillowcase
  • Lace 40″ long

Start by collapsing the 11″ full pillowcase band into equal parts the long way. Press Stick the 40″ side to the right side of the 40″ side.

Serge the crease

A Simple Way of Sewing a Pillowcase
A Simple Way of Sewing a Pillowcase

Press the crease to the other side. Utilizing the crease tape, press the lace onto the pillowcase focused over the ridge between the pillowcase and the band. Top join Fasten lace near the edge to secure. Overlap the pillowcase into equal parts and serge the base and sides. Clasp the strings.

Sew around the outside of the case. Sew part of this around four layers and another part just two. Try to use small seam allowance as much as possible. Sew it across the middle of the two layers and avoid sewing the rest of the sleeve. Trim the excess parts all around for a clean and straight finish.

Figure out where you will place the Velcro pieces. You will need to at the underside of the flap that is near the top. After putting the Velcro, fold the flap down, mark where they meet with your sleeve, and then sew the other pieces over there.

 

5. How to Sew a Library Bag for Kids

Library Bag for Kids
Library Bag for Kids

This is one of the most straightforward sewing projects for beginners.

Supplies needed.

  • Two coordinating fabrics ½ yard each
  • ½ yard of fusible fleece interfacing. (Optional)

Instructions

Cut two pieces of main material of about 13” by 15” long. From the inner fabric, cut the same sizes also.

How to Sew a Library Bag for Kids
Cut two pieces of main material

 

Cut strips of about 4” by 27” long. To the back of your main fabric, fuse the

interfacing by ironing it.

Put the two sides of main fabric together and sew the bottoms. Apply the same case to the inner material.

 

How to Sew a Library Bag for Kids
make the straps

Let us now make the straps. On the underside, fuse the interfacing. You need to fold the straps in half lengthwise to touch the right sides. After that, sew the long side.

 

Turn it inside out making sure that the seam is at the center of the back and then press it.

How to Sew a Library Bag for Kids

Turn the inner part of the back to its right side without interfering with the outer part.

 

Now, slide the inner part down and into the outer part.

Between the two layers, slide the straps down and on each side.

 

How to Sew a Library Bag for Kids
Sew all around

This is how the straps should lay on top of the bag. Slide them in after putting them correctly inside the bag, pin them.

Now sew the bag way around leaving a small opening of about 4” for turning it.

Turn it to its right side. Now press the top edge. Top stitch it to close the

opening and to make it look good. Then you have your bag ready.

 

6. How to sew a pencil case

How to sew a pencil case
How to sew a pencil case

Supplies needed.

  • Two coordinating fabric each ¼ yard
  • A zipper about 9.”

Instructions

Cut the fabric into rectangles of about 9.5” by 5.5”. Cut two from each fabric. Take your zipper and one piece of fabric. Lay the zipper on top of the inner part of the material. Take another piece of cloth and place it on top facing the other fabric. Pin the zipper along. Stitch along the zipper edge and stop when you get closer to the zipper pull. Unzip the zipper and then continue sewing. Then repeat the same process no the other side of the zipper. Sew along the zipper again. Lay the fabric so that the right sides are touching the main material and sandwiching with the inner element.

Sew the raw edge of its bottom. Fold so that the zipper comes to the center and unzip it halfway. Now sew the short ends. Go to the corners and pinch it so that it forms a triangle. Sew along that edge and snip off to the end. Do the same with all other edge making sure that they look even. Pull it to its right sides.

 

7. Ear warmer Headband

Ear warmer Headband
Ear warmer Headband

Wool little sum (presumably 1/8 of a yard or less) But you have to ensure that you can cut your strips the stretchy bearing so test which heading is stretchy before you get it. You have to purchase downy enough that you can cut your strips the stretchy line.

Coordinating string

To begin with, measure your make a beeline for perceiving how huge it is. Presently, snatch your wool. You will see that if you pull it one bearing, it is stretchy, the other way, not really. You have to cut two strips that are 4″ wide by the estimation of your head. Yet ensure that you cut the long estimate with the goal that your strips are stretchy. Then, put the pieces one of best of the other (if your wool has a right side ensure the correct sides are as one within). Sew down every one of the long sides leaving the short finishes open.

Turn right side out and top fasten along every one of the long edges. At that point, snatch both of the closures and crisscross them together. What’s more, that is it!

Also Read: 8 Best Sewing Machine 2018 | Choose Best among Rest

 

8. Key Fobs

Key Fobs

Supplies Needed:

  • Little measures of 2 textures (extraordinary approach to utilize scraps)
  • 7-inch zipper

Cut out your texture. You will require two pieces every one of two distinct surfaces for an aggregate of four parts. Each section ought to be 7 1/2″ wide by 5 1/2″ tall.

Texture

Presently, if you need to add unsettle to it, there is an instructional exercise for that. Make it with the goal that the two closures can hang off this finishes of the texture. Sew it set up where you need it on one of your external pieces:

Key Fobs

Adding ruffle

Presently we will start to assemble the pack. Snatch one of your external pieces and one of our internal. Place the textures together with right sides together, and the zipper sandwiched between them along the best edge with the right side of the zipper touching the right side of your external texture.

Sew along the best through the two layers of texture with the zipper in the middle. Move the zipper haul out of your way while sewing. Part of the way through you should stop and move it again with the goal that it is out of your way the entire time. Then do that with your other two textures and the opposite side of the zipper. You will sew directly through the unsettle and there will be overabundance hanging off. Recently cut that end off after you sew this progression.

Press everything pleasant and level:

Top join along the zipper on the two sides of the zipper. Open your zipper almost the entire way. Crease the sack, so your textures are touching with right sides together. The external pieces will touch each other, and the inward will touch each other. Sew the distance around each of those. Leave a little opening to turn it when you are sewing the internal part:

Trim off any abundance zipper or unsettle and turn everything right side out. Jab out the corners to get them pleasant and fresh and line your opening closed. Press is all pleasantly again. That is it!

Also Read:  Best Sewing Machines For Quilting | Compare Before Buying

9. Ice cream purses

Ice cream purses

Supplies Needed:

  • 12 cm texture for cone
  • 15 x 10 cm texture for frozen yogurt
  • 15 x 15 cm texture for covering
  • Handbag fasten
  • Weaving string for the garnish

Step by step instructions to Make Cute Ice Cream Purses

Stage One

Start by drawing a frozen yogurt format. Next, you have to remove your textures. You should cut two bits of the entire layout for the coating, two bits of the triangular part for the frozen custard and two bits of the scoop part for your dessert. When removing the shapes, take into account 1 cm crease recompense.

Stage 2

Stick the cone to the scoop, right sides together, and sew along the flat edge. Press level with an iron. Presently stick these two sorts out and sew at the edges of the cone, leaving the scoop open. Rehash this progression with the coating textures, leaving a 2 cm hole along one of the corners to empower you to turn it.

Stage 3

Utilizing cut line; weave the edges to look like 1000s onto the dessert scoop texture.

Stage 4

In light pencil or tailor’s chalk, draw around the handbag catch onto the highest point of the texture to go about, as a rule, to sew around and to guarantee it is the correct size.

Ice cream purses

Stage 5

To append the covering to the external texture, open them up (they should both be back to front) so they are looking with right sides together. Stick the distance around the scoop, and sew.

Stage 6

Make small cuts along the bends, with the goal that when the handbag is turned out, it will not pucker.

Stage 7

Turn the handbag the correct way out, tucking the coating into the satchel. Push the dessert to bring up. Sew up the opening in the layer utilizing a slip line. Press level.

Stage 8

To connect the tote you fasten by a string. Drive each side up into the lock and utilize backstitch to append it. Conceal the bunch in within the handbag. Now, your purse is ready.

 

10. Baby Bibs

Baby Bibs

Supplies

  • 2-1/2 yard cuts of wool texture (yields two face cloths)
  • Coordinating Thread
  • Pins
  • Sewing Machine
  • Snaps or Velcro
  • Face cloth Pattern

Child Bibs Sewing Instructions:

Start by printing and taping together your child kiddie apron design. Cut out each example piece and adjust the two little triangles together.

Stick your example to your texture and afterward cut around the pattern. Each tucker requires two bits of the surface so remember that on the off chance that you anticipate making different sets.

Baby Bibs
Baby Bibs

Systematically instructions to Make Baby Bibs

You might need to consider utilizing two organizing textures because the kiddie apron is reversible. Lay your kiddie apron sort’s wrong sides out and stick. If sewing around adjusted edges abandons you feeling somewhat apprehensive, draw a line around your tucker 1/2 from the corner to use as a guide while you are sewing.

Make a point to utilize a launderable checking pen

Begin at the base and sew up and around the neck and end where you started. Keep in mind to backstitch! Then it is the ideal opportunity for the periphery! Slice near, however not through the sewing each 1/4 inch the distance around the face cloth. Apply a snap 1/2 inch from your sewing line on either side of the kid’s apron. You could without much of a stretch apply a 1-inch bit of Velcro on the off chance that you would prefer not to utilize snaps.

Baby Bibs
I love daddy! I love mummy!

 

In addition, sometimes you may even have to pay subscription fees to access your course. Here’s a good discussion about this.

Conclusion

All the above sewing projects are suitable for beginners who are looking free patterns online. You should start your sewing journey with the high sewing projects. Always consider what we stated at the beginning of this article that you do not have to give up because of small mistakes that you will make here and there. Keep going no doing it matter what.  If you enjoyed my writing – please let me know in the comments section below. Thanks and have fun with your project!


Check Also

Brother CS6000i Sewing Machine Reviews

The Brother CS6000i Sewing Machine Reviews

Are you searching for the best Brother CS6000i Sewing Machine Reviews? When it comes to …

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

shares